注塑模具厂家在验收模具时，要注意一些常见的问题，因此需要提前了解好，然后做好预防措施，这样才能顺利进行下一步的工作，下面来解析下问题内容吧。
Injection mold manufacturers should pay attention to some common problems when accepting molds, so they need to understand them in advance, and then take preventive measures, so as to smoothly carry out the next step of work. Let's analyze the content of the problem.
由于接受模具的过程中总是伴随着一定的风险，所以对于任何可以想象和可能出现的情况，我们都须提前进行风险评估。应放在模具的复杂性、备件的关键特性、零件后处理的质量以及移动模具过程中的任何可预见的意外事件上。
As there are always certain risks in the process of accepting molds, we must carry out risk assessment in advance for any conceivable and possible situation. The focus should be on the complexity of the mold, the key characteristics of the spare parts, the quality of the post-processing of the parts, and any foreseeable accidents in the process of moving the mold.
如果评估后发现风险因素较高，则需要在收货前做好更详细的搬家前准备工作。收到货后，应尽量避免模具损坏的发生，导致停产停产，对注塑生产企业经营产生负面影响。
If the risk factors are found to be high after the assessment, more detailed preparations should be made before the goods are received. After receiving the goods, we should try our best to avoid mold damage, which will lead to shutdown and have a negative impact on the operation of injection molding production enterprises.
济南注塑模具厂家建议在观察一组模具加工的运行情况，包括检查模腔状况、周期时间、成型工艺条件，其中不可思议的四点就是评估价值。如果模具不工作，特别是模具长时间不用，在模具准备好转移之前，需要进行试加工，评估模具的使用价值。
Jinan injection mold manufacturers suggest observing the operation of a group of mold processing, including checking the mold cavity condition, cycle time and molding process conditions, among which the incredible four points are the evaluation value. If the mold does not work, especially if the mold is not used for a long time, it is necessary to carry out trial processing and evaluate the use value of the mold before the mold is ready for transfer.
剩下的标本可以尽可能多地知道，但不可能知道更多的细节。实际生产工艺条件可能未知，或者修改后的工艺参数可能未知。循环时间不能外推，特殊的辅助设备可能不会引起注意。
The remaining specimens can be known as much as possible, but it is impossible to know more details. The actual production process conditions may be unknown, or the modified process parameters may be unknown. The cycle time cannot be extrapolated, and special auxiliary equipment may not attract attention.
如果模具在加工一个零件时只使用模具中的部分型腔，而不是模具在全型腔注射时的运行状态，那么发给客户的各种数据的加工参数当然是有问题的。卖方交付模具前，在注塑机上进行满腔注射状态的试车，以检查模具每件产品的质量。
If the mold only uses part of the cavity in the mold when processing a part, rather than the running state of the mold when it is injected in the full cavity, the processing parameters of various data sent to the customer are certainly problematic. Before delivering the mold, the Seller shall conduct a full injection test on the injection molding machine to check the quality of each product of the mold.
This is the content related to the analysis of common problems when the injection mold manufacturer collects the mold. If you are not concerned about the existing problems, it will affect the quality of injection molding products and cause losses. For more information, please visit the website http://www.sdlqmj.com Consult.
