济南立强模具有限公司是一家提供济南注塑模具注塑加工等产品的山东模具制造厂家

山东济南注塑模具制造加工

     

新闻动态

您现在的位置: 网站首页>>新闻动态>>济南注塑模具的需要主要的细节

济南注塑模具的需要主要的细节

来源:http://www.sdlqmj.com 日期:2020-07-10 发布人:liqiang 浏览次数:
济南注塑模具应在注塑机、模具正常运转情况下,测试模具各种性能,并将成型的塑件尺寸测量出来,通过这些信息可确定模具的现有状态,找出型腔、型芯、冷却系统以及分型面等的损坏所在,根据塑件提供的信息,即可判断模具的损坏状态以及维修措施。
Under normal operation of injection molding machine and mold, all kinds of performance of injection mold should be tested, and the size of the final molded plastic parts should be measured. Through this information, the existing state of the mold can be determined, and the damage of cavity, core, cooling system and parting surface can be found. According to the information provided by the plastic parts, the damage status of the mold and maintenance measures can be judged.
弹簧等弹性零件在使用过程中弹簧更易损坏,通常出现断裂和变形现象。采取的办法就是更换,在更换过程中一定要注意弹簧的规格和型号,弹簧的规格和型号通过颜色、外径和长度三项来确认,只有在三项都相同的情况下才可以更换。
Spring and other elastic parts are easy to be damaged in the process of use, and usually appear fracture and deformation. The method adopted is to replace. In the process of replacement, pay attention to the specification and model of spring. The specification and model of spring are confirmed by color, outer diameter and length, and can only be replaced when the three items are the same.
济南注塑模具
模具产品使用过程中冲头易出现折断、弯曲和啃坏的现象,冲套一般都是啃坏的。冲头和冲套的损坏一般都用相同规格的零件进行更换。冲头的参数主要有工作部分尺寸、安装部分尺寸、长度尺寸等。
The punch is easy to break, bend and gnaw during the use of die products, and the punching sleeve is generally gnawed. The damage of punch and punch sleeve is usually replaced with parts of the same specification. The parameters of punch mainly include working part size, installation part size, length dimension, etc.
零件也需要时不时的固定,要经常检查紧固零件是否出现松动、损坏现象,采取的办法是找相同规格的零件进行更换。
Parts also need to be fixed from time to time. It is necessary to check whether the fastening parts are loose or damaged. The method is to replace the parts with the same specifications.
保养时检查各部位的配件关系及有无损坏,对损坏的部分进行修复,气动顶料检查有无漏气现象,并对具体的情况采取措施。如气管损坏进行更换。
During maintenance, check the relationship between parts and whether there is any damage, repair the damaged part, check whether there is air leakage by pneumatic jacking, and take measures for the specific situation. If the air pipe is damaged, replace it.

相关新闻

地址: 济南市天桥区太平庄药山镇丁庄工业园8号; 网址:http://www.sdlqmj.com  传真:0531-61388458   手机:18610627886

济南立强模具有限公司   鲁ICP备15002024号-2   技术支持:济南诺商 流量统计: