济南立强模具有限公司是一家提供济南注塑模具注塑加工等产品的山东模具制造厂家

山东济南注塑模具制造加工

     

新闻动态

您现在的位置: 网站首页>>新闻动态>>注塑模具的保养及维护!

注塑模具的保养及维护!

来源:http://www.sdlqmj.com 日期:2019-03-15 发布人:admin 浏览次数:
  (1)定期检查、上油。模具投入正常生产是连续工作,其工作周期在一个月至几个月之间。这期间,为了保证制件的成批供应,就必须保证模具不间断地正常运转操作者在交接班时,除了生产制品数量情况的交待外,还要对模具使用状况有一个较详细的交接。模具上的滑动部件、导柱、回程杆、顶杆、型芯等要随
  (1) Regular inspection and oiling. Mould put into normal production is continuous work, its working cycle is between one month to several months. During this period, in order to ensure the batch supply of parts, it is necessary to ensure that the normal operation of the die is uninterrupted. When the operator handover, besides the quantity of the products produced, there is also a more detailed handover of the use of the die. Sliding parts, guide pillars, return rods, ejector rods, core etc. on the die should follow.
  时观察,定期检查,并在交班记录上加以说明。接班的操作者要对滑动部件的工作面上油,尤其在夏季室温高的情况下,每个班应上油两次,以防止干摩擦乃至将工作面拉伤。
  Observe regularly, check regularly, and explain in the shift record. Successors should oil the working face of sliding parts, especially when the room temperature is high in summer. Oil should be applied twice in each shift to prevent dry friction and even pull the working face.
济南注塑模具
  2负责企业先要了解模具的基本情况如首先应给每副模具配备履历卡,详细记载、统计其使用、护理(润滑、清洗、防锈)及损坏情况,据此可发现哪些部件、组件已损坏,磨损程度大小,以提供发现和解决问题的信息资料,以及该模具的成型工艺参数、产品所用材料,以缩短模具的试车时间,提高生产效率。
  2. The responsible enterprise should first understand the basic situation of the mould. For example, each die should be equipped with a resume card to record and count its use, nursing (lubrication, cleaning, rust prevention) and damage. According to this, it can find out which parts and components have been damaged and the extent of wear and tear, so as to provide information for finding and solving problems, as well as the forming process parameters and materials used in the product. In order to shorten the test run time of the die and improve the production efficiency.
  3、加工企业应在注塑机、模具正常运转情况下,测试模具各种性能,并将后成型的塑件尺寸测量出来,通过这些信息可确定模具的现有状态,找出型腔、型芯、冷却系统以及分型面等的损坏所在,根据塑件提供的信息,即可判断模具的损坏状态以及维修措施。
  3. Processing enterprises should test all kinds of properties of moulds under normal operation of injection moulding machines and moulds, and measure the size of final moulded parts. Through these information, the existing state of moulds can be determined, and the damages of cavity, core, cooling system and parting surface can be found out. According to the information provided by moulds, the damaged state of moulds and maintenance measures can be judged.

相关新闻

地址: 济南市天桥区太平庄药山镇丁庄工业园8号; 网址:http://www.sdlqmj.com  传真:0531-61388458   手机:18610627886

Copyright © 2018 济南立强模具有限公司   版权所有  鲁ICP备15002024号-2   技术支持:济南诺商 流量统计: