济南立强模具有限公司是一家提供济南注塑模具注塑加工等产品的山东模具制造厂家

山东济南注塑模具制造加工

     

新闻动态

您现在的位置: 网站首页>>新闻动态>>五金模具损坏的原因!

五金模具损坏的原因!

来源:http://www.sdlqmj.com 日期:2019-04-12 发布人:admin 浏览次数:
五金冲压模具是制造五金冲压件不可短少的重要设备,因而模具的好坏对冲压件的质量有着很大的影。东莞市长东模具有限公司是一家专业开发制造五金模具,而在五金模具消费过程,常常会呈现冲压模具损坏现象,招致消费本钱增加,产质量量降落,影响企业正常消费次序。招致五金模具损坏的缘由有很多。
  Hardware stamping die is an indispensable and important equipment for manufacturing metal stamping parts, so the quality of the die has a great influence on the quality of stamping parts. Dongguan Mayor East Mould Co., Ltd. is a professional manufacturer of hardware molds. In the process of consumption of hardware molds, stamping die damage often occurs, which leads to increased consumption costs, reduced production and quality, and affects the normal consumption order of enterprises. There are many reasons for the damage of metal mould.
  1、五金模具在冲压过程中,假如存在模具强度设计不够或受力不均,模具导向不良、倾斜,或模板间有异物等状况,就会招致具合模不灵敏,以至卡死。这时就需求中止消费,找出卡模缘由,扫除毛病,否则,就会扩展毛病,招致模具损坏。
  1. In the stamping process of metal die, if there are some problems such as insufficient strength design or uneven force, poor die orientation, inclination, or foreign objects between the templates, it will lead to insensitive clamping and even stuck. At this time, demand to stop consumption, find out the reason for the card, clean up the defects, otherwise, it will expand the defects, causing die damage.
  2、五金模具的制造资料及其热处置工艺能否合适,对模具质量影响很大,假如冲压模具的淬火温渡过高,淬火办法和时间不合理,以及回火次数和温度、弯头管件,肘间选择不当,都会招致模具进入冲压消费后损坏,五金冲压件质量受损。
  2. Whether the manufacturing data and heat treatment technology of hardware die are suitable or not has a great influence on the quality of die. If the quenching temperature of stamping die is too high, the quenching method and time are unreasonable, and the tempering times and temperature, elbow pipe fittings are not properly selected, the die will be damaged after entering stamping consumption, and the quality of hardware stamping parts will be damaged.
山东模具制造厂家
  3、五金模具在加工过程中,假如有异物进入冲压模具、制件堆叠、废料阻塞等状况呈现,却没能未及时处置,模具还继续运用,就很容易招致模具的落料板、冲头、下模板和导柱损坏。
  3. In the process of processing, if foreign bodies enter the stamping die, the stacking of parts and the blockage of waste materials, but fail to be disposed of in time, and the die continues to be used, it is easy to cause the damage of blanking plate, punch, lower template and guide post of the die.
  4、五金冲压模具落料孔尺寸或深度设计不够,容易使槽孔阻塞,形成落料板损坏。弹簧力设计太小或等高套不等高,会使弹簧断裂、落料板倾斜,形成堆叠冲打,损坏零件。冲头固定不当或螺丝强度不够,会招致冲头掉落或折断,损坏模具。
  4. The size or depth of blanking hole of metal stamping die is not enough, which can easily block the groove hole and cause the blanking plate to be damaged. The spring force design is too small or the height of the equal sleeve is not equal, which will cause the spring to break and the blanking plate to tilt, forming stacked punching and damaging parts. If the punch is not fixed properly or the screw is not strong enough, it will cause the punch to fall or break and damage the die.
  5、五金模具在运用时,零件位置、方向等装置错误或螺栓紧固不好。工作高度调整过低、导柱光滑缺乏,送料设备有毛病,压力机异常等,都会形成冲压模具的损坏。
  5. When the hardware die is used, the position and direction of the parts are wrong or the bolts are not tightened properly. Low adjustment of working height, lack of smooth guide pillar, faulty feeding equipment, abnormal press, etc., will cause damage to the stamping die.
  五金模具制造难度大、本钱较高,以及投入消费后的模具修理和刃磨维护费用也高,因而在五金冲压件消费过程中,要理解招致模具损坏的缘由,及时对模具停止维修颐养,防止损坏模具,延长模具运用寿命,可减少冲压消费的模具费用。
  Hardware die manufacturing is difficult, the cost is high, and the cost of repairing and grinding after investment is high. Therefore, in the process of metal stamping parts consumption, it is necessary to understand the cause of die damage, timely stop the maintenance of the die, prevent the damage of the die, prolong the service life of the die, and reduce the die cost of stamping consumption.

相关新闻

地址: 济南市天桥区太平庄药山镇丁庄工业园8号; 网址:http://www.sdlqmj.com  传真:0531-61388458   手机:18610627886

Copyright © 2018 济南立强模具有限公司   版权所有  鲁ICP备15002024号-2   技术支持:济南诺商 流量统计: