济南立强模具有限公司是一家提供济南注塑模具注塑加工等产品的山东模具制造厂家

山东济南注塑模具制造加工

     

新闻动态

您现在的位置: 网站首页>>新闻动态>>模具设计需遵循的七条原则!

模具设计需遵循的七条原则!

来源:http://www.sdlqmj.com 日期:2019-04-22 发布人:admin 浏览次数:
山东模具制造厂家提示大家,塑料制品通常要批量或大批量生产,故要求模具使用时要高效率、高质量,成型后少加工或不加工,所以模具设计时必须考虑:
Shandong mould manufacturer reminds you that plastic products are usually produced in batches or in batches. Therefore, it is necessary to use the moulds with high efficiency and quality, and less or no processing after moulding. Therefore, the design of the moulds must take into account:
1.据塑件的运用性能和成型性能肯定分型面和浇口位置。
1. The location of the parting surface and gate is confirmed according to the application and forming properties of the plastic parts.
2.思索模具制造工程中的工艺性,据设备情况和技术力气肯定设计计划,保证模具从整体到零件都易于加工,易于保证尺寸精度。
2. Consider the technicality of the mould manufacturing engineering, confirm the design plan according to the equipment condition and technical strength, ensure that the mould is easy to process from the whole to the parts, and ensure the dimensional accuracy easily.
3.思索注射消费率,进步单位时间注射次数,缩短成型周期。
3. Consider injection consumption rate, improve injection times per unit time and shorten molding cycle.
4.将有精度请求的尺寸及孔、柱、凸、凹等构造在模具中表现出来,即塑件成型后不加工或少加工。
4. The dimension required for precision and the structure of holes, columns, convex and concave are shown in the mould, that is, no or less processing after the plastic parts are formed.
山东模具制造厂家
5.模具构造力图简单适用,稳定牢靠,周期短本钱低,便于装配维修及改换易损件。
5. The die structure is simple and applicable, stable and reliable, short cycle and low cost, easy to assemble, repair and change vulnerable parts.
6.模具资料的选择与处置。
6. Selection and disposal of die data.
7.模具的规范化消费:尽量选用规范模架、常用顶杆、导向零件、浇口套、定位环等规范件。
7. Standardized consumption of dies and moulds: as far as possible to select normative parts such as normative die holder, common ejector rod, guide parts, gate sleeve, positioning ring and so on.
本文精彩内容由山东模具制造厂家整理提供!希望通过小编的介绍对大家有所帮助,我们的官网是:http://www.sdlqmj.com多谢大家的阅读观看!
The wonderful content of this article is provided by Shandong Mould Manufacturer. Hope to be helpful to you through the introduction of Xiaobian. Our official website is: http://www.sdlqmj.com. Thank you for reading and watching!

相关新闻

地址: 济南市天桥区太平庄药山镇丁庄工业园8号; 网址:http://www.sdlqmj.com  传真:0531-61388458   手机:18610627886

Copyright © 2018 济南立强模具有限公司   版权所有  鲁ICP备15002024号-2   技术支持:济南诺商 流量统计: