济南立强模具有限公司是一家提供济南注塑模具注塑加工等产品的山东模具制造厂家

山东济南注塑模具制造加工

     

新闻动态

您现在的位置: 网站首页>>新闻动态>>铝合金冲压模具制造需要的注意事项!

铝合金冲压模具制造需要的注意事项!

来源:http://www.sdlqmj.com 日期:2019-08-08 发布人:admin 浏览次数:
铝合金型材原材料过软,较贵,非常容易破裂及其一部分铝合金型材商品还需事件生产加工,如金属拉丝﹑阳极处理等,在冲压模具生产制造时非常非常容易造成顶伤﹑划伤,山东模具制造厂家提示大家,在模具加工层面要需注意以下内容:
Aluminum alloy profile raw material is too soft and expensive, it is very easy to crack and some of its products need event production and processing, such as metal wire drawing, anode treatment, etc. It is very easy to cause top injury and scratch in stamping die production and manufacturing. Shandong die manufacturer reminds you that it is necessary in die processing level. Note the following:
1. 针对不危害工程项目数的状况下冲孔机尽可能排到后边工程项目冲孔机,以至于针对冲孔机总数较多的商品可考虑到多做1个工程项目还要将冲孔机排到后边冲。
1. In view of the situation that does not endanger the number of projects, the punching machine is arranged as far as possible in the back of the project, so that for the commodities with a larger number of punching machines, one more project can be considered and the punching machine should be arranged in the back of the project.
2. 铝料过软且磨具较非常容易堵料,故在设计方案磨具放空隙时宜放多边料厚12%的空隙,刀口直深位以2Mm比较适合,锥度以0.7-1°为适合。
2. Aluminum material is too soft and abrasives are very easy to plug. Therefore, in the design of abrasives, 12% of the thickness of polygonal material should be placed in the clearance. The straight depth of the cutter is suitable for 2M, and the taper is suitable for 0.7-1 degree.
3. 钣金折弯成形时,因铝料在钣金折弯时非常容易造成铝屑,会导致点伤﹑压印,铝原材料需贴pE膜,在滚轴及电镀工艺的状况下,成形块以打磨抛光镀硬铬为宜。
3. In sheet metal bending process, because aluminium material is very easy to cause aluminium scraps during sheet metal bending, which will lead to spot injury and stamping. Aluminum raw materials need to be pasted with pE film. Under the condition of rollers and plating process, polishing and hard chromium plating is the best choice for forming blocks.
山东模具制造厂家
4. 因铝料较脆,非常容易裂开,尤其反折边的状况下,故 好不要做过线,即便要做,还要将过线做宽一点儿,打浅一点儿。
4. Because the aluminium material is brittle and easy to crack, especially in the case of reverse hemming, it is better not to make wires. Even if we do, we should make the wires wider and shallower.
5.铝件较易发烫,并库存积压一起发硬,故在冲孔机开料时要在原材料上涂点压扳油(只能热管散热,又可圆满输通落料)再冲压模具。
5. Aluminum parts are easy to get hot, and the stock backlog is hard together. Therefore, when the punch is opened, it is necessary to coat the raw material with a point of pressure pulling oil (only heat pipe can dissipate heat, but also can successfully transport blanking) and then press the die.
今天的精彩内容就给大家介绍到这里了,感谢大家的观看,如果想了解更多的行业相关信息,大家可以搜索关键词:山东模具制造厂家,来找到我们。或者可以直接把我们的网址:http://www.sdlqmj.com添加到收藏栏目,这样可以更方便的找到我们!
Today's wonderful content will be introduced to you here, thank you for watching, if you want to know more industry-related information, you can search keywords: Shandong Mold Manufacturer, to find us. Or you can directly add our website: http://www.sdlqmj.com to the collection section, so that we can find us more easily!

相关新闻

地址: 济南市天桥区太平庄药山镇丁庄工业园8号; 网址:http://www.sdlqmj.com  传真:0531-61388458   手机:18610627886

Copyright © 2018 济南立强模具有限公司   版权所有  鲁ICP备15002024号-2   技术支持:济南诺商 流量统计: