In injection molding processing, some time factors of specific operation will also affect the quality of injection molding products. In order to do a good job of injection molding products, it is a craft and requires certain operation. It not only requires very skilled techniques, but also has strict requirements for the control of specific time. Let's talk about the time factors affecting injection molding ink processing in Jinan.

一、射胶时间

1、 Glue injection time

在注塑产品的加工中，射胶不仅能够实现保护产品的作用，还能够让产品更加有光泽，不过要掌握好射胶的时间可不是一件容易的事，因为在射胶时不仅仅要考虑射胶的时间，还要考虑到压力，速度和温度等等一系列因素，所以说是很难把控的。

In the processing of injection molding products, glue injection can not only protect the products, but also make the products more shiny. However, it is not easy to master the time of glue injection, because it is difficult to control not only the time of glue injection, but also a series of factors such as pressure, speed and temperature.

二、低压保护时间

2、 Low voltage protection time

在这时间里，就要将保护的时间设置成为两秒，不过在根据具体的情况，在多加零点几秒的延迟，这样才能够起到低压保护的作用。

In this time, first of all, set the protection time to two seconds, but according to the specific situation, add a delay of a few tenths of a second, so as to play the role of low-voltage protection.

三、冷却时间

3、 Cooling time

冷却时间要根据产品具体的形状太设定，但是冷却时间要大于溶胶时间，要让产品充分的定型才可以。

The cooling time should be set according to the specific shape of the product, but the cooling time should be greater than the sol time, and the product should be fully shaped.

四、保压时间

4、 Pressure holding time

为了保证济南注塑墨迹产品的尺寸规格大小能够符合要求，保压时间是非常重要的，保压的时候将溶液倒流之前让浇口冷却，这个时间可以根据浇口来决定。

In order to ensure that the size of Jinan injection ink products can meet the requirements, the pressure holding time is very important. During the pressure holding, let the gate cool before the solution flows back. This time can be determined according to the gate.