欢迎访问济南立强模具有限公司!

当前位置:首页-新闻中心-行业资讯-了解一下注塑模具里的浇注系统

了解一下注塑模具里的浇注系统

来源:http://www.sdlqmj.com/ 日期:2021-11-27

济南注塑模具厂家今天给大家说说平时用到的模具都是由什么组成,他们分别起到了什么作用。
、Jinan injection mold manufacturers today to tell you that usually used by the mold is composed of what, they play a role in what.
该模具主要由浇注系统、调温系统、成型部件和结构部件组成。在塑模中,浇注系统和模塑零件是与塑料直接接触的部分,是塑模中最复杂、变化最大、要求加工光洁度和精度最高的零件。
The mould is mainly composed of pouring system, temperature regulating system, molding parts and structural parts. In the plastic mold, the casting system and the molded parts are the parts in direct contact with the plastic, which are the most complicated, changeable parts in the plastic mold and require the highest machining smoothness and precision.
注射模由动模和定模两部分组成,在注射成型机的移动模板上安装动模,定模安装在注射成型机的固定模板上。注塑过程中动模与定模的闭合构成浇注系统和型腔,开模时动模与定模分离以取出塑料制品。为降低模具设计与制造工作量,目前大多数注塑模具均采用标准模架。
The injection mould is composed of a moving mould and a fixed mould. The moving mould is installed on the moving mould of the injection molding machine, and the fixed mould is installed on the fixed mould of the injection molding machine. The gating system and the cavity are formed by the closing of the moving and fixed moulds in the injection molding process. In order to reduce the workload of mould design and manufacture, most injection moulds adopt standard mould bases at present.
下面我们先说说注塑模具里面的浇注系统
Let’s talk about the gating system inside the injection mold first
注塑系统是塑料从射嘴进入型腔前的流道部分,包括主流道、冷料穴、分流道、浇口等。
The injection molding system is the part of the runner before the plastic enters the cavity from the injection nozzle, including the main runner, the cold material hole, the branch runner, the gate and so on.
浇铸系统也叫流道系统,是将塑料熔体从注射机喷嘴引导到型腔内的一系列进料通道,通常包括主流道、分流道、浇口和冷料穴。其成形性与塑料制品的成型质量和生产效率密切相关。
A casting system, also known as a runner system, is a series of feeding channels that guide the plastic melt from the injector nozzle to the cavity, usually including the main runner, distributor, gate, and cold pockets. Its formability is closely related to the molding quality and production efficiency of plastic products.
今天先说到这里,详细了解注塑模具里面的调温系统和其它部件,关注后面为大家一一介绍。
Today first said here, detailed understanding of the injection mold inside the temperature control system and other parts, attention to the following for everyone to introduce.

相关产品 / Related products

济南立强模具有限公司

鲁ICP备15002024号-2

网站地图    TXT    XML